Are you looking to get the best results from seal coating? Then, look no further! Sealcoating 2.0 can help you achieve amazing results with our seal coating services. In this blog post, we will discuss the seal coating process and how to ensure your project is a success.
Going Back to the Basics
Before we dive into how to get the best results from seal coating let’s take things back the basics a little bit. Seal coating is a process of applying a sealant, usually asphalt emulsion, to asphalt-based pavements to protect and preserve them. This protective coating also helps extend the life of your pavement by blocking out moisture and ultraviolet rays that can cause damage and degradation over time. There are four major components that go into seal coating your driveway. Those components are,
- Binder: The binder is the backbone of your sealcoating composition. This is the component that is responsible for protecting, preserving, your driveway while also working to bond with the asphalt pavement.
- Clay and Fillers: The combination of clay and mineral fillers help to improve the tensile strength, hardness, and resistance to abrasion in sealcoating. It is essential that the right balance between suppleness and durability be achieved for proper performance.
- Water: Due to its versatility, water is the ideal solution for stabilizing and dispersing all ingredients. Its simplicity makes it easy to use, store, and apply.
- Specialty Chemicals: Specialty chemicals help the sealcoating do its job better by making it more water repellent, flexible, and resistant to salt and petrochemicals.
Now that you know about the components that make up your asphalt sealant, there are three major types of seal coating you can choose from.
Asphalt Emulsion- Based Sealcoating
This sealant is made from asphalt-based emulsions and works best on driveways and parking lots. It has the highest resistance to water, salt, petrol, and chemicals than all other types of sealants.
Refined Tar-Based Sealcoating
This type of sealant is made from refined tar-based emulsions and works best on driveways and parking lots in colder climates. It typically has a higher resistance to ultraviolet rays than other types of sealants.
Specialty Resins
Specialty resins are a combination of asphalt and tar-based emulsions with added chemical additives. This type of sealant works well on driveways, parking lots, and any other asphalt pavement in need of protection.
No matter which type of sealant you choose, there are a things to keep in mind to ensure you get the best results from seal coating.
Get the Best Results From Seal Coating by Following the Process
As we mentioned before, one of the ways to get the best results from seal coating is by understanding the basics, but another way to ensure you get the best results from seal coating is by following the proper process.
Planning
Just like any sucessful project the first step in the seal coating process is planning. Before you begin your seal coating project, it’s important to inspect the pavement and make sure it is in good condition. If there are any cracks, potholes, or other damage on the pavement these must be repaired before the sealant can be applied. In order to ensure you get the best results from seal coating it is important for a thorough assessment of the pavement to be conducted. Some questions we may ask include,
- Has your driveway been sealed before? If so what was it sealed with?
- Are there any cracks? How big are they?
- Are there any signs of water pumping through the cracks?
- Are there a lot of oil or rust spots?
- Do you have an automatic sprinkler system? If so you will have to make sure to turn this off to ensure the best results from seal coating.
Planning the Application
Once you have a good understanding of the pavement, you can begin planning for the application of your seal coating. The type of sealant you choose will determine how many coats you need to apply and how long each coat needs to dry before another coat is applied. In order to ensure that your sealant lasts as long as possible it’s important to follow the manufacturer’s instructions for application.
Prepping the Pavement
Before you apply any seal coating it is important to make sure the surface is properly prepped. This means taking the time to clean, fill cracks and gaps, and remove any loose debris from the asphalt pavement. Doing this will help ensure that the sealant adheres to the surface appropriately and provides optimal protection.
Applying the Sealant
The next step in the seal coating process is applying the sealant. Depending on the type of sealant you choose, this could be done with a brush, roller, or sprayer. It’s important to make sure that you apply an even coat of sealant and follow any instructions provided by the manufacturer.
Curing Time
After the sealant is applied, you should allow it to cure for a few days. This will ensure that the sealant is completely dry and won’t be affected by any rain or snow. After this time, your driveway or parking lot will look brand new!
Seal coating your driveway or parking lot can help extend its life, protect it from the elements, and improve its aesthetic value. Knowing the basics of seal coating and following the proper process is key to getting the best results. With a little bit of planning and preparation, you can be sure that your driveway or parking lot is properly sealed and ready for years of use!
Ensure the Best Results from Seal Coating with Sealcoating 2.0
By following the seal coating process, you can ensure that your driveway or parking lot is properly sealed and protected from the elements. With Sealcoating 2.0, you don’t have to worry about doing all of the work yourself – simply choose a sealant that meets your needs and let our experts take care of the rest. We’ll make sure your pavement is properly prepped and sealed, so you can enjoy the aesthetic value and protection that comes with sealcoating for many years to come. Contact our team today to ensure you get the best results from seal coating!